Standard Components
Many applications are best served with custom-designed components, which optimize performance for a specific requirement. However, some applications can utilize standard components. Below we show a variety of standard products grouped by application, which serve as examples of what we can achieve. We can usually customize such products to meet your particular requirements.
An alphanumeric listing can be viewed here.
Current Transformers
| B5051 | 10 Amp / 1 Volt |
| B5051.1 | 10 Amp / 1 Volt (Ruggedized) |
| B5051.3 | 5 Amp / 1 Volt |
HDSL Transformers
| B5045 | 1168 kbps 2000V Isolation (Matched to Brooktree Bt8952) |
| B5046 | 786 kbps 2000V Isolation (Matched to Brooktree Bt8952) |
| B5047 | 1168 kbps 2000V Isolation (Matched to Brooktree Bt8921) |
| B5048 | 784 kbps 2000V Isolation (Matched to Level One SK70704) |
| B5057 | 784 kbps 2000V Isolation (Matched to Level One SK70704) |
| B5058 | 1168 kbps 2000V Isolation (Matched to Level One SK70704) |
| B5107 | 416 kbps 6500V Isolation (Matched to Brooktree Bt8970) |
ISDN and E1/T1 Transformers
| 02840 | E1/T1 |
| 02905 | E1, 75 Ohm or 120 Ohm, Output |
| 02908 | E1, Input, Reinforced Insulation |
| 02912 | E1, Output, Supplementary Insulation |
| 02920 | E1, Input |
| 02921 | U Interface with 30mA DC |
| 02927 | T1, Input |
| 02930 | E1/T1 Reinforced Insulation |
| 02932 | U Interface with 50mA DC |
| 02933 | U Interface with 20mA DC |
| B5001 | 2Mbps Very Low Profile |
| B5002 | 2Mbps Very Low Profile |
| B5004 | ISDN S-Interface Transformer |
| B5022 | 64 KBPS 1:1:1 Encapsulated |
| B5023 | 64 KBPS 1:1+0.24 |
| B5025 | 128kbps 1:1+0.24 |
| B5026 | 128kbps 1:1+1 |
| B5077 | 8Mbps 1:1:1 75 Ohm |
| B5097 | SMD 50 Ohm 2Mbps |
| B5098 | SMD 100 Ohm 2Mbps |
| B5425 | E1/T1 G.703 Balun 120 ohm/75 ohm |
| P2030 | 2Mbps High Isolation |
| P2031 | 2Mbps High Isolation |
| P2231 | 2Mbps High Isolation |
| P2638 | 2Mbps High Isolation |
Pulse Transformers
| B5049 | 8kV Impulse Isolation Transformer |
| B5118 | 1:1:1 Pulse Transformer |
| B5257 | 2CT:1 (76614/1 equivalent) |
| B5258 | 1CT:1 (76614/3 equivalent) |
| B5265 | 4:1 (76610/1 equivalent) |
| B5268 | 1:1 (76601/1 equivalent) |
Data over Mains/Powerline Carrier Transformers
| B5050 | 125kHz Tuneable |
| B5073 | Very High Isolation (Low Cost) / Application Notes |
| P1207 | Very High Isolation |
Power across PSTN barrier Transformers
Audio Transformers
| 03138 | 600 Ohm with 120mA DC |
| B5104 | 600 Ohm : 600 Ohm Screened |
| B5105 | 10 kOhm : 10 kOhm Screened |
| B5108 | 600 Ohm C.T.: 600 Ohm C.T. Screened |
| B5109 | 10 kOhm C.T.: 10 kOhm C.T. Screened |
| B5148 | 1 : 0.5 + 0.5 Screened |
| B5169 | 1 : 0.5 + 0.5 Screened |
Digital Audio Transformers
| B5229 | 1:1 wideband with screen |
| B5274 | 1:2 wideband with screen |
High Impedance Pick-Off Transformers
| P1487 | Pick-Off Transformer 3:1 impedance match |
| P1910 | High Isolation Low Profile |
| P2647 | High Impedance Shunt Line Drive Transformer |
600 ohm Line Matching Transformers
Cross impedance and <600 ohm line matching Transformers
| B5003.5 | 120 Ohm 1:1 |
| P1001 | High Isolation Baseband Transformer |
| P1208 | High Isolation 600 Ohm:140 Ohm Coupling |
| P1524 | 300 Ohm:600 Ohm C.T |
| P2697 | Low Profile Signal Transformer 62 Ohm / Application Notes |
Loop Control Transformers
| 804194 | Loop Control Transformer 145-270uH |
| 804195 | Loop Control Transformer 259-431uH |
Transducer Drive Transformers
| B5167 | Transducer Driver Transformer 6:1 ratio |
| B5204 | Transducer Driver Transformer 4.05:1 ratio |
Intrinsically Safe Transformers
| B5160 | SMP Transformer - Intrinsically Safe |
| B5180 | SMP Transformer - Intrinsically Safe |
| B5201 | Line Txfr 600: 600 ohm Intrinsically Safe |
| B5202 | Line Txfr 600: 600 ohm c.t. Intrinsically Safe |
SMPS Transformers
| 03015 | Push-Pull, 5V to 15V |
| B5089 | Step-Up Switched Mode |
| B5138 | Flyback Transformer |
Video 'braid breaker' Transformer
| B5184.1 | 75 ohm Braid Breaker Transformer |
50Hz/60Hz Transformers
| 02847 | 120 / 240V, 8V+8V, 4VA |
| B5052 | 6V - 6V Isolation Transformer |
Line Hold Chokes
| P1202 | Low Profile BS 6403 |
| P1402 | Low Profile 120mA DC capable / Application Notes |
| P1419 | Low Cost 120mA DC capable / Application Notes |
| P1467 | Balanced Load Capable 120mA DC |
| P1808 | Low Cost Balanced Load Capable 120mA DC |
| B5072 | Balanced Load Capable 200mA DC |
Common Mode Chokes
| 02916 | Quad Choke 4.7mH So |
| 02928 | Quad Choke 0.2mH E1/T1 |
| B5161 | Common Mode Choke |
Fixed Inductors
| 02902 | 37μH, Variable Inductor | |
| 02978 | 20μH, 8A, Inductor | |
| 02998 | 100μH, 1.25A, Axial Choke | |
| B5082 | 100μH, 2A, Inductor | |
| B5012 | Inductor self-supporting | |
| B5170 | Inductor RM6 Rugged mount | |
| B5172 | 22/33/47μH d.c. tolerant Inductor | |
| B5190 | 100μH, 1A, Surface Mount Inductor | |
| B5193 | Inductor RM6 | |
| B5259 | 10μH, 25A, Power Inductor | |
| B5261 | 27μH, 10A, Power Inductor | |
| B5273 | 1μH, 10A, LISN Inductor | |
| B5290 | 11μH Inductor | |
| B5387 | 2.4mH, 0.8A, Inductor | |
| B5426 | 22mH Loading Coil | |
| B5427 | 88mH Loading Coil |